HEATING SERVICES
IN PHOENIX, AZ

  • GET AN INSTANT HEATING ESTIMATE!
  • SERVING PHOENIX RESIDENTS FOR OVER 20 YEARS
  • SENIOR AND VETERAN DISCOUNTS
  • NO WEEKEND, HOLIDAY, OR OVERTIME CHARGES

HEATER TUNE-UP MAINTENANCE & REPLACEMENT SERVICE

At ACE Home Services, we provide an annual 21-point inspection to our customers. Designed to help your heating equipment run efficiently and without failure all year round. Annual tune-ups can help you save money on repairs while reducing the cost of your heating bill in winter months. We also offer yearly heating coil cleaning, and duct cleaning services every three years to make sure air quality and airflow are as good as they can be.

HOW WE KEEP YOUR HVAC RUNNING SMOOTHLY

Your furnace can wear out with use as it works hard to circulate air in your home. Dirt and debris can collect in air ducts, especially ones that are overworked. If you feel your furnace and heating system is costing you too much and is overworked, we can test your system for compromoses and repair or replace with the best option for you.

For the past 25 years we have offered reliable heater repair and replacement services for homes in Arizona. Our HVAC tecnicians specialize in furnace repair and maintenance for all major manufacturers. Not sure if it’s time to repair or replace your heat pump or furnace? Our professional team is here standing by to help call 602-943-2000.

 Our technicians will help you select a new and efficient furnace for your home. We also offer furnace repair and tune-up options to help prolong the life of your unit.

ACE TIPS: TO AVOID COSTLY HEATER & FURNACE REPAIRS

It is important to get your units serviced every year. Tune-ups are cost-effective and can save you on replacing expensive parts before they break beyond repair.

You should get your coils cleaned annually and ducts cleaned every three years. The cleanliness of your coils and duct work can affect not only your air quality, but also the airflow. If your coils and ducts are dirty, air is restricted, which costs you more money in electricity to get the comfort you desire.

5 MAIN HEAT PUMP COMPONENTS

A working heat pump keeps your Phoenix home comfortable year round, but when yours is on the fritz or it’s simply time to upgrade to a more efficient unit, it’s definitely not work that you can do on your own. Heat pump and furnace repair or installation is a little too complicated for the average homeowner, even if you are pretty handy with your tools.

6 MAIN GAS FURNACE COMPONENTS

1. Thermostat

2. Heater Exchanger

3. Burner

4. Ducts

5. Flue

6. Blower Motor

OUR 21-POINT FURNACE & HVAC TUNE-UP SERVICES INCLUDE:

1. CHECK THERMOSTAT OPERATION

Our furnace and HVAC tune-up services include an audit of the thermostat to ensure the furnace operates properly with the current settings.

2. INSPECT PLENUM

Inspect the plenum on the furnace for faulty components, including if the pan gasket needs to be replaced.

3. INSPECT DUCTS

Each HVAC tune-up appointment includes an inspection of the air ducts to check for obstructions, including debris, dirt, and pet dander.

4. INSPECT FOR AIR DUCT LEAKS

Inspect ducts for air leaks in the system that may effect the efficiency of your heating system.

5. CHECK CONDENSATION DRAIN PAN

Check water level in the condensation drain pan to make sure pooling doesn’t take place.

6. CHECK CONDENSATION DRAIN

Check the heating unit’s condensation drain for any clogs and for proper drainage.

7. CHECK INDOOR BLOWER MOTOR

Check for a bad blower motor and to make sure it operates correctly.

8. CHECK BLOWER MOTOR RUN CAPACITOR

Check if the blower motor run capacitor holds the correct electrical charge and runs properly.

9. INSPECT CONDITION OF BLOWER WHEEL

Inspect if the blower motor powers the wheel correctly and that belts are in good working order.

10. CHECK OF MEASURE AIR FLOW

Check the velocity that air travels through the ventilation system.

11. CHECK & TEST SAFETY

Check that all safety components are in place and in tact to prevent any future breakdowns.

12. CHECK ELECTRICAL WIRING OF SYSTEM

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

13. CHECK OPERATION

Check that the unit works properly both inside and out.

14. CONDITION COMPRESSOR CONTRACTOR

Ensure compressor contractor runs as expected and its integration with related components.

15. CHECK RELAYS

Check that your unit’s relay switch works correctly.

16. TEST RUN CAPACITORS

Test that the motors attached to the run capacitor function appropriately.

17. CHECK SYSTEM STARTING COMPONENTS

Check each starting component to ensure it functions correctly in sequence.

18. CHECK REFRIGERANT PRESSURES

Check that the unit’s refrigerant suction line has the correct amount of pressure.

19. CHECK CONDENSER MOTOR OPERATION

Check that the condenser motor operates correctly plus at the right speed and voltage.

20. CHECK INSULATION ON TUBES & PANELS

Check that the heaters tubes and panels are properly insulated.

21. CALCULATE OPERATING EFFICIENCY

Ensure your heater operates efficiently and at what rate.

AFFORDABLE GAS FURNACE REPAIR & MAINTENANCE SERVICES

Your furnace is a major part of keeping your home comfortable in the winter. Unfortunately, most homeowners simply aren’t equipped to handle gas furnace repair and maintenance. If your home furnace is having issues, we recommend contacting an HVAC contractor. Ace Home Services offers affordable gas furnace repair services in Phoenix and other areas of Arizona. We offer gas furnace repair services for all major brands and models. We also offer furnace installation and furnace tune-up solutions to meet your unique needs. From complicated compressor repairs to condenser, evaporator and air handlers, ACE Home Services can handle it all. Thermostat installation and repair is also a specialty of ours. Our HVAC contractors are able to perform a standard furnace repair for your current model or select a new unit that will make your heating even more efficient. After all, programmable thermostats can save you money, and fitting one to your home could be easier than you think.

ACE TIPS: HOW TO KNOW IF YOU NEED A NEW FURNACE

Heating systems have a lifespan of 10 to 20 years. Heat pumps older than 10 years, and furnaces older than 15 years, often need replacing. The efficiency of these units decreases with age, which affects both the quality of air in your home and the cost of electricity to run it.
Does your unit require repairs more often than not? If every time you schedule a maintenance call, you need to repair a part, it is probably time to consider replacing the unit as a whole. The amount you spend on repair could be going towards a new, more efficient unit. Ultimately, you could save money by replacing your old, ineffective unit.

If certain rooms are warmer or cooler than others, something could be malfunctioning in your unit. Our expert technicians can evaluate the ductwork and ventilation of your unit to determine the best solution to improve air flow.

A properly functioning unit should not leave your place feeling humid and uncomfortable. If this is an issue in your commercial building, the problem could have to do with your unit.

Noisiness is a sign of a malfunctioning coil or undersized duct system, both leading to costly repairs. Prevent costly breakdowns and repairs with annual tune-ups. If your system continues to make excessive noise, a replacement may be the best option for you!

FILL OUT THE FORM BELOW
TO GET A QUOTE